SẢN PHẨM26 sản phẩm

All in one serial provides a complete solution to produce clean and dry compressed air.

TR Series Three main advantages for aluminum alloy three-in-one heat exchanger refrigerated air dryer: Energy saving, Environmental  protection, High Efficiency.

Compared to single-stage compressors, a two-stage is much closer to isothermal compression. This is achieved by the injection of fresh oil between the stages which reduces the inlet temperature to the second stage. This lower inlet temperature increases efficiency by reducing the compression ratio between the stages. In addition, leakage between the rotor seals is significantly reduced resulting in outstanding volumetric efficiency.

Air Pressure: 7~10 [bar], 101~145[psi], 0.7~1.0[Mpa]

Air Capacity: 0.9~43 [m³/min], 15~717[l/s], 32~1519[cfm]

Working Power: 7.5~250 [kW], 10~340[hp]

Permanent magnet variable speed all in one compressor provides a complete solution to produce clean and dry compressed air.

High performance filters designed to remove impurities (water, oil, particles) contained in compressed air networks. Thanks to their many options (differential pressure gauge, anti-seize thread, depressurization orifice, condensate sight glass) and their optimal finish (aluminum and bronze body, epoxy paint), they are the best solution for the filtration of your networks.

CDK-SA / SW Series Refrigerated Air Dryer offers the best solutions to minimize energy loss, reduce corrosion level, prolong life of compressed air systems and decrease maintenance costs.

EXR & EXD/CT Desiccant Air Dryer offers the best solutions to minimize energy loss, reduce corrosion level, prolong life of compressed air systems and decrease maintenance costs.

Advanced V-profile air end and high precision processing, provide highest efficiency with its high volume flow rate.

Permanent magnet variable speed screw air compressor, with synchronous motor, has no slip, no electrical excitation and low heat loss.

Efficient two-stage compression motor; dual coaxial integrated design; double permanent magnet synchronous motor; dual frequency conversion control

Air Pressure: 8~10 [bar], 116~145[psi], 0.8~1.0[Mpa]

Air Capacity: 600~5400 [L/min]

Working Power: 7.5~49.5 [kW], 10~67[hp]