Low Pressure Screw Air Compressor Serial TPM-IID

Low Pressure Screw Air Compressor Serial TPM-IID Detail Advantage Low Pressure Screw Air Compressor Serial TPM-IID

Low Pressure Screw Air Compressor Serial TPM-IID Low Pressure Screw Air Compressor Serial TPM

Low Pressure Screw Air Compressor Serial TPM-IID

Name: All In One Fix Speed Serial TFSTD
Brand: Typhoon
SKU: N/A
Availability: InStock
Rating: 2,4 (613 reviews)

(1205 đánh giá)
Nhà sản xuất: Typhoon

Nơi sản xuất: N/A

Giá: Gọi liên hệ

Đặt mua ngay

Surpass Energy Efficiency Class A
Horizontal Type Two Stage PM Variable-Frequency Screw Air Compressor

- SMOOTH SPEED ADJUSTMENT
- EXCEEDS Fl RST CLASS ENERGY EFFICIENCY STANDARDS
- LOW NOISE
- HIGH DISCHARGE CAPACITY
- DUAL INVERTER CONTROL

Đánh giá của bạn về sản phẩm này:

Sản phẩm cùng danh mục

All In One Fix Speed Serial TFSTD

All in one serial provides a complete solution to produce clean and dry compressed air.

2,4/5 (613 đánh giá)

835 lượt

Gọi liên hệ

New

Two-Stage PM VSD Air Compressor Series (TPTT-V)

Compared to single-stage compressors, a two-stage is much closer to isothermal compression. This is achieved by the injection of fresh oil between the stages which reduces the inlet temperature to the second stage. This lower inlet temperature increases efficiency by reducing the compression ratio between the stages. In addition, leakage between the rotor seals is significantly reduced resulting in outstanding volumetric efficiency.

5,0/5 (1 đánh giá)

13 lượt

Gọi liên hệ

All In One Permanent Magnet Serial TPMTD

Permanent magnet variable speed all in one compressor provides a complete solution to produce clean and dry compressed air.

2,4/5 (610 đánh giá)

753 lượt

Gọi liên hệ

Fixed Speed Air Compressor Serial TFS

Advanced V-profile air end and high precision processing, provide highest efficiency with its high volume flow rate.

5,0/5 (1 đánh giá)

786 lượt

Gọi liên hệ

Permanent Magnet Screw Air Compressor Serial TPM

Permanent magnet variable speed screw air compressor, with synchronous motor, has no slip, no electrical excitation and low heat loss.

2,2/5 (1.210 đánh giá)

919 lượt

Gọi liên hệ

Two Stage Permanent Magnet Serial TPM-IID

Efficient two-stage compression motor; dual coaxial integrated design; double permanent magnet synchronous motor; dual frequency conversion control

2,2/5 (1.202 đánh giá)

922 lượt

Gọi liên hệ

Low Pressure Screw Air Compressor Serial TPM-IID

Nhà sản xuất: Typhoon

Giá: Gọi liên hệ

Đặt mua ngay

Thông tin sản phẩm

Product Advantages

High efficiency horizontal motor, permanent magnet synchronous motor

Gearless: IPM motor and air end are connected through one shaft without a gear box: no gear pitting, no broken teeth. Without coupling: Two independent IPM motors drive each of the two-stage air ends directly. One-shaft structure, without coupling worries. Without motor bearings: High-Performance permanent magnet materials, without motor bearings, reduce fault risks for longer service life.Without leak troubles: A special design of sealed structure prevents oil leakage by 100%, no leak troubles.

Frequency inverter

Typhoon Horizontal Type Two Stage PM Variable-Frequency Screw Air Compressor.
Has the Prominent Advantages of Energy-Saving, Stable, Low noise, Surpass Energy Efficiency Class A
1）Double Coaxial Integrated Design.
2）Double PM Synchronous Motor.
3）Double VFD Control.
4）High Efficient Two Stage Airend.
5）Horizontal Structure, Underslung, Lower Vibration.

Intelligent control

Through higher intelligent control, the size of air production can be adjusted automatically, therefore, no matter how the air volume fluctuates, the pressure is always maintained which means the operation is really under constant pressure.;
The motor responds quickly, starts quickly and loads quickly.When the air volume is suddenly changed, it can respond quickly and the reaction time is within 50ms. It completely avoids the damage of uers' equipment and product defects caused by the pressure tuation, moreover, it reduces the energy loss caused by the pressure fluctuation.

Oil & Air separator

Three-stage separation of oil and gas is achieved: Centrifugal separation, gravity separation, separation by fine core. With high-efficiency oil-air separator to ensure that the compressed air oil content is less than 3ppm. High-precision large-capacity oil separator using time can be up to 4000 hours

Efficiency filtration system

Make exhaust oil content lower than 3ppm. Hepa filter, removes impurities in the lubricating oil to provide clean lubricating oil for the rotor and bearing of the motor, filters dust in the air, make the motor rotor and bearing free of damage.

High capability cooling system

Using axial fan, large propeller, lower speed and lower noise. With high air pressure, high air volume and stable operation.
Large heat exchanger, using high strength aluminum alloy material, ensure good cooling effect even under 45 degree environment.

Product Parameter

Model	Power		Pressure	Capacity	Dimensions	Weight	Outlet Pipe	Noise Level
Model	KW	HP	bar	M3/min	(LxWxH) mm	Kg	Diameter	dB
TPM50A- llD	37	50	4	9.36	1650x1300x1850	1360	G2"	75
TPM50A- llD	37	50	5	8.79	1650x1300x1850	1360	G2"	75
TPM60A- llD	45	60	4	11.32	1650x1300x1850	1360	G2"	75
TPM60A- llD	45	60	5	10.61	1650x1300x1850	1360	G2"	75
TPM75A-llD	55	75	4	14.95	2670x1880x2000	2800	DN65	80
TPM75A-llD	55	75	5	13.91	2670x1880x2000	2800	DN65	80
TPM100A-llD	75	100	4	19.01	2670x1880x2000	2800	DN65	80
TPM100A-llD	75	100	5	18.60	2670x1880x2000	2800	DN65	80
TPM120A-llD	90	120	4	23.92	3335x2145x2055	3600	DN100	82
TPM120A-llD	90	120	5	22.78	3335x2145x2055	3600	DN100	82
TPM150A-llD	110	150	4	28.33	3335x2145x2055	3600	DN100	82
TPM150A-llD	110	150	5	26.98	3335x2145x2055	3600	DN100	82
TPM175A-llD	132	175	4	33.10	3335x2145x2055	3600	DN100	85
TPM175A-llD	132	175	5	31.14	3335x2145x2055	3600	DN100	85
TPM200A-llD	160	200	4	44.67	3978x2378x2450	6200	DN125	85
TPM200A-llD	160	200	5	41.70	3978x2378x2450	6200	DN125	85
TPM250A-llD	185	250	4	47.39	3978x2378x2450	6200	DN125	85
TPM250A-llD	185	250	5	45.00	3978x2378x2450	6200	DN125	85
TPM270A-llD	200	270	4	50.83	3978x2378x2450	6200	DN125	85
TPM270A-llD	200	270	5	46.20	3978x2378x2450	6200	DN125	85
TPM300A-llD	220	300	4	54.00	3978x2378x2450	6200	DN125	85
TPM300A-llD	220	300	5	51.45	3978x2378x2450	6200	DN125	85

Product Parameter 2-3 Bar

Model	Power		Pressure	Capacity	Dimensions	Weight	Outlet Pipe	Noise Level
Model	KW	HP	bar	M3/min	(LxWxH) mm	Kg	Diameter	dB
TPM60AL	45	60	2	15.00	2560x1710x1950	2500	DN80	80
TPM60AL	45	60	3	13.00	2560x1710x1950	2500	DN80	80
TPM75AL	55	75	2	18.50	2560x1710x1950	2500	DN80	80
TPM75AL	55	75	3	17.50	2560x1710x1950	2500	DN80	80
TPM100AL	75	100	2	25.00	2860x1800x2080	2800	DN100	80
TPM100AL	75	100	3	22.00	2860x1800x2080	2800	DN100	80
TPM120AL	90	120	2	30.00	2860x1800x2080	2800	DN100	85
TPM120AL	90	120	3	27.00	2860x1800x2080	2800	DN100	85
TPM150AL	110	150	2	38.50	3515x2230x2450	3300	DN150	85
TPM150AL	110	150	3	31.50	3515x2230x2450	3300	DN150	85
TPM175AL	132	175	2	43.50	3515x2230x2450	3500	DN150	85
TPM175AL	132	175	3	37.50	3515x2230x2450	3500	DN150	85
TPM200AL	160	200	2	50.50	3515x2230x2450	3600	DN150	85
TPM200AL	160	200	3	45.50	3515x2230x2450	3600	DN150	85

The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C).
Recommend frquency 30%-100%.
The above data is based on the standard grid- 380V/ 50HZ.
Please make further inquiry for the non-standard specification type and machines which are used under high/low temperature, high humidity, dusty working environment.